Honeywell-AMCO 1803B2 1″Natural gas regulator
Honeywell AMCO 1803B2 1" spring-loaded gas regulator, max 9 bar inlet, 9-140 mbar outlet, ductile iron body, NPT threaded.
Product Details
1800B2(HC) Series Pressure Regulator
The 1800B2(HC) Series pressure regulator by AMCO is a spring-loaded, compact regulator featuring a high-strength cast iron body and cast aluminum valve plate. It is characterized by a special anti-corrosion coating, simplicity, lightweight design, minimal maintenance, ease of installation, interchangeable parts, and low cost. This series can be equipped with a combination of high and low pressure shutoff and relief functions, making it suitable for building pressure regulation boxes and industrial/commercial users with demands below 120 cubic meters. It is designed to operate in ambient temperatures ranging from -30°C to +60°C.
Key Technical Specifications:
Maximum Inlet Pressure: 8.79 kgf/cm²
Outlet Pressure: 0.87 kPa to 13.8 kPa
Maximum Flow Rate:
70.8 Nm³/h (1800B2)
130 Nm³/h (1800B2-HC)
Operating Temperature: -30°C to +65°C
Valve Body Connections: 3/4”, 3/4″x1″, 3/4″x1-1/4″, 1″, 1″x1-1/4″, and 1-1/4″ NPT thread
Offset Valve Body: 3/4”, 3/4″x1″, 1″ NPT thread
Standard Configuration: 3/4”, 1″, 1-1/4″ NPT thread
Features:
Outlet Pressure Spring Range: Same as 1800C(HC)
Construction:
- Body Material: Ductile Cast Iron
- Valve Plate: Cast Aluminum
- Connection Type: NPT or BSP-TR Threaded
- Anti-corrosion coating on body surface
Available Configurations:
- 1803B2: Basic regulator, no relief, with vent
- 1813B2: With full-capacity internal relief
- 1823B2: With under-pressure shut-off (UPSO)
- 1833B2: With full internal relief and UPSO
- 1843B2: With full internal relief and over-pressure shut-off (OPSO)
- 1853B2: With full internal relief, OPSO and UPSO
- 1883B2: With OPSO only
- 1893B2: With OPSO and UPSO
